 |
 |
| Direct Precipitation with T6 page 3 |
Direct Precipitation in your situation now means you need NO special
equipment, are NOT screwing up the environment, leave NO wastes behind,
and capture 100% of all the metals you came for.
They are added in very small amounts, after adjusting the PH to 8.4 with acid
or base..typically with NAOH (lye) or Sulfuric acid, which instantly cause the
metals to form as metallic salts.
The Precipitants are a Patented combination of Sulfurs, Carbons and
Polymers which reduce ALL metals to their lowest electrical charge (valence)
within minutes, can be filtered out of solution easily, and fired as metallic
salts.
This means a 1-2-3 collection operation.
1. COLD FILTER THE WATER, FREE OF DEBRIS
2. ADD THE PRECIPITANT, PER DIRECTIONS
3. FILTER OUT OF SOLUTION
From here, you can dry and smelt these directly to metals.
All sulfurs, carbon and stray metal salts are either driven off by smelter
temperatures, or absorbed into the flux.
The result is 99% pure metals.
For the vast majority of those now capturing metals via leaching, this means
a greatly simplified recovery procedure, now within the realm of the backyard
chemist and weekend miner.
These will precipitate from SSN, Chlorine, Bromine, Thiourea, Iodine and
other Leach formulas with simple PH adjustments, and will reduce metals
instantaneously to smeltable forms.
The Precipitants are being shipped directly from the factory under our own
label ("Goldmineworld"), and shipped directly to you.
Each lb. of precipitant will reduce an equal weight of Metal.
All precipitants are deemed NON-TOXIC, NON-HAZARDOUS, and
compatible with stream life, plants, animals and people, as used.
They ARE, in fact, used to stabilize chemical spills, cleanse effluent flows,
and leave the water sparkling clean for the re-use by both wildlife and
humanity. The final waters leave at PH 7.0, as Nature intended.
equipment, are NOT screwing up the environment, leave NO wastes behind,
and capture 100% of all the metals you came for.
They are added in very small amounts, after adjusting the PH to 8.4 with acid
or base..typically with NAOH (lye) or Sulfuric acid, which instantly cause the
metals to form as metallic salts.
The Precipitants are a Patented combination of Sulfurs, Carbons and
Polymers which reduce ALL metals to their lowest electrical charge (valence)
within minutes, can be filtered out of solution easily, and fired as metallic
salts.
This means a 1-2-3 collection operation.
1. COLD FILTER THE WATER, FREE OF DEBRIS
2. ADD THE PRECIPITANT, PER DIRECTIONS
3. FILTER OUT OF SOLUTION
From here, you can dry and smelt these directly to metals.
All sulfurs, carbon and stray metal salts are either driven off by smelter
temperatures, or absorbed into the flux.
The result is 99% pure metals.
For the vast majority of those now capturing metals via leaching, this means
a greatly simplified recovery procedure, now within the realm of the backyard
chemist and weekend miner.
These will precipitate from SSN, Chlorine, Bromine, Thiourea, Iodine and
other Leach formulas with simple PH adjustments, and will reduce metals
instantaneously to smeltable forms.
The Precipitants are being shipped directly from the factory under our own
label ("Goldmineworld"), and shipped directly to you.
Each lb. of precipitant will reduce an equal weight of Metal.
All precipitants are deemed NON-TOXIC, NON-HAZARDOUS, and
compatible with stream life, plants, animals and people, as used.
They ARE, in fact, used to stabilize chemical spills, cleanse effluent flows,
and leave the water sparkling clean for the re-use by both wildlife and
humanity. The final waters leave at PH 7.0, as Nature intended.
| Updated 10/26/2006 |